Middle Air Chaps TM

The Middle Air Chaps are a set of precision NC machined  3/16" thick clear Lexan polycarbonate deflectors that attach to the standard Boulevard windshield mounting points supported by brushed stainless steel brackets. The mounting brackets are very stiff and prevent any vibration or oscillation of the deflectors at high speed. The deflectors are angled back at 10 degrees to develop outward flow of the air stream. The Lexan polycarbonate deflectors are clamped to the brackets with Neoprene gaskets on either side to prevent stress cracks from forming. 

Price $229.95 + S&H 
(Check the Order page for special combination prices)

They deflect the air flow out and off your upper legs and knees and block the air flow that normally comes over the top of the gas tank. Note that they overlap the bottom of the standard windshield to induce flow up the channel behind the windshield and direct the air flow to the Upper Air Chaps which redirect the air flow out and away from your face.

The Middle Air Chaps are the set to start with if you are going to order one set at a time.

The Middle Air Chaps attach to the two bolts that hold the standard Boulevard windshield to the mounting frame. The bolts on the Standard windshield are 90.0 mm apart. If your windshield is earlier than 2005 but has this bolt spacing the Middle set of Air Chaps should fit your bike. The only tool required is a extended length 5 mm  ball end Allen wrench which is supplied with the deflectors and installation instructions.

Note: The Middle Air Chaps are not compatible with the large Cobra Engine Guards due to interference when the fork is at full lock. OEM light bars are not compatible due to mounting interference.